Amana Gas Oven Ignitor Not Working

However if it keeps clicking this means the igniter isn t lighting the gas but it is still trying.

Amana gas oven ignitor not working. If the igniter glows for more than 90 seconds without igniting the gas flame this indicates that the igniter is too weak to open the valve. As the igniter draws electric current it will heat to a high temperature and glow as well as cause the bi metal in the oven safety valve to warp and open the valve releasing the gas to be ignited. Other possible problems include a faulty thermostat control loose or broken wires or a bad safety valve. If your gas oven is not working but the burners are the problem is probably the igniter.

Product help site for amana appliances. To determine if the igniter is defective observe the igniter when the oven is on. Amana 7200w oven igniter not working. I have the replacement part with a single plug on the end for the two wires.

This sequence normally takes about a minute. How do i remove the old igniter from inside the oven down near the back of the burner without taking the back plate of the appliance off or apart. Check to see if the issue is with the gas supply lines or the igniter itself for gas stoves. If the valve does not open the oven will not heat.

Oven ignitor looked like it was glowing and working properly but the gas valve would not open to let the gas flow to burner. Checked lower oven burner for a problem. Oven not working what to check product help amana. Like gas burners on your stove the oven igniter may click when it is trying to ignite the gas.

Replace it if it s bad. If your stove top igniters are working fine but your oven won t light then you don t have an issue. Oven not working but broiler was working fine. If the igniter gets weak it will fail to open the safety valve correctly.

It is best not to let an oven linger when it is clicking and not lighting as this means gas is still being released and building up.